Home page    成型設備    PL6-S400 Hand Sheet Former

PL6-S400 Hand Sheet Former

PL6-S400 hand sheet former is a lab equipment using for making hand sheet in size of 400 mm × 400 mm.
  • PL6-S400 hand sheet former is a lab equipment using for making hand sheet in size of 400 mm × 400 mm. An efficient water drainage for forming hand sheet is achieved by releasing water from large diameter valve with an assistance of an operation of vacuum pump. An even pulper were formed via either manual stirring or automatic bubble stirring before water drainage down to the screen, leaving an even wet sheet on the wire.  It is appliable for forming super thin, super thick fibers reinforced sheets.   

    Technical Specifications:  

    1. Sheet size: 400 mm × 400 mm
    2. Deckle volume: 64 L
    3. Three phase electrics: Power capacity 3.34KW 
    4. Equipment size: 1600 mm * 780 mm * 1680 mm
    5. Spares: mesh screen with stainless steel frame ready to use in the former. One tool to affix the mesh screen on the steel frame. 

    Xianyang taist Test Equipment Co. Ltd.